- Median arms

Median arms are adjusted gradually by successive sanding the ends.
A metal rod secures the alignment with the body and a screw from the shed to hold it firmly.

- hangars

The big and long underside part of the hangar was bending under its ownweight, so I had to screw it at the center, by adding wooden wedges inside (like on the front).

- belly cross

Hangars being adjusted, I can now run the resin in the cross part to lock permanently the square tube in it.
I clogged the end with Tac gum

This is the result once the resin cured

- Nose

There is an level between the up and bottom of the part, so I sanded it, and the nose is then screwed in the head.