Launchpad - Repairing the damages
Par olcabour le vendredi, 23 décembre 2011, 11:27 - Launchpad - Lien permanent
The damages on the 4 quarter lift platform are repaired with cyano glue. The joints are not yet worked nor filled but some resin is flow along the edge dove, inside of course, to strengthen it. Some house painting tape and three small streams of resin did the job perfectly. In just over an hour, the face became strong enough.
- before
- after
As I was starting do the same with the two other sides (those forming the square angle), I realized that these walls must be removed ! Indeed, there is a 6 or 7 millimeters step, which, if it is static, lay the "+" orange lift part. Which also means I'll have to recreate all the walls revealing itself when the elevator slides down.
- before
- after
